与传统 LED显示屏重量相比，重量轻60%-80%，大大减轻显示屏基础结构的强度和重量，尤其适用于超大尺寸的 LED显示屏，透空率为40%-50%，具有极强的抗风能力，有效减轻了 LED显示屏基础结构的强度和重量。
每个 LED灯条均采用铝合金材料，四周透光性好，可实现良好的自体散热。与此同时，将电源、控制等与发光材料隔离，无需特殊配置散热系统，如 LED屏。
With the technological advancement of LED display screens and the expansion of application areas, LED displays have been further subdivided into different application areas, such as advertising screens, stage rental screens, door head screens, indoor small spacing, traffic guidance screens, etc. Outdoors, there is a kind of LED display that presents a unique scene-LED grid screen.
What is the LED grid screen?
The LED grille display screen has a strip, hollow, and transparent product form, also known as curtain screens, curtain wall screens, and Xinhuicai grille screens. Due to its light weight, small wind load, and flexible installation, it has A more flexible application approach, usually used for building exterior walls and stage LED rental display screens, etc., is a new generation of outdoor LED display products, especially suitable for the construction of super large outdoor display screens.
1. Light weight, small wind load, suitable for large display screens.
The weight is 60%-80% lighter than the traditional LED display, which greatly reduces the strength and weight of the basic structure of the display. It is especially suitable for the construction of super large-scale LED display. The air permeability is 40%-50%, and it has strong wind resistance. , Effectively reduce the wind load, and further reduce the strength and weight of the basic structure of the LED display.
2. Simple structure, convenient installation and easy maintenance.
It can be easily attached to the wall with a small amount of components, and has no damage to the wall and foundation. According to the needs, it is convenient to realize the pre-maintenance or post-maintenance. If the front maintenance method is adopted, there is no need to establish a maintenance channel.
3. Good self-heating system, no need to install air conditioner for heat dissipation.
Each LED light bar is made of aluminum alloy material, which is transparent around, so it can achieve good self-heating. At the same time, the power supply, control, etc. are isolated from the luminescent material, and there is no need to build a heat dissipation system like traditional LED screens.
4. Highly integrated light bar structure, high product stability.
Adopting unique electronic circuit design to reduce the number of light strips, each 16 light strips share a set of power and signal connectors. Under the same conditions, the probability of poor connection is reduced by 94%.
5. Integrated design of control box and installation structure.
The control box is not only a part of the screen, but also a part of the structure. The structure of the screen body is greatly simplified, and no plugs and connections can be seen outside the screen. It is not only beautiful, but also greatly improves the stability of the screen. 6. High brightness, high refresh, high gray, and can be played during the day.